Miller Hall: M23

Introduction

This article will instruct how to use the teachers podium and display in 2nd floor of Miller Hall M23.

Instructions

1. Look at the touch-panel located on the wall near the podium
2. Select Start System
   
3. Once you’ve selected Start System the screen will start to come down and the projector will turn on (it will typically auto-source to the desktop image)
   
4. Now that the system has booted on, select the source you wish to use. You may source the projector to Local PC or you may source it to your laptop via Laptop HDMI or Laptop VGA (You may need an adapter depending on your device) .
   
5. If you would like the to adjust the screen up or down to utilize the whiteboard, you may use the Screen Controls option
   
6. Once you select the Screen Controls option, a pop-up will appear with an up or down option, just select which direction you would like the screen to go
   
7. If you would like to Mute or Unmute your displays, you may select the options shown below
   
8. You may adjust or mute the volume in the room using the touch panel (See image below). If you prefer, you may also use the regular volume adjustment on your local computer or laptop.
   
9. If you are ever stuck and need assistance, you may select the Help option
   
10. It will display the number for our Educational Media office phone line
    
11. When you are finished with class, you may shut down the system by selecting the power option in the bottom left of the screen
    
12. Then select the green check option